|
| |
This is
just a sample of the most popular reels that we carry
If we don't have what you
are looking for - we will order it for you.
Avet Reels
JX Series
  
6/3 Two
Speed Model, Gear Ratio H6.0:1, L2.8:1
4.6:1 with clicker Single Speed Model, Gear
Ratio
4.6:1
6.0:1 with clicker
Single Speed Model, Gear Ratio
6.0:1
 |
Lever Drag control system with pre-set drag feature.
|
|
|
New cast control system only available from Avet
Reels.
(prevention of backlash and as an line out adjustment for live bait
fishing) |
|
|
100% machined, Type 2 anodized, True-One piece
aluminum frame. |
|
|
8 stainless steel ball bearings.
|
|
|
Stainless steel fasteners, springs, clips. |
|
|
Stronger design with larger line capacity in its
class. |
|
|
All new revolutionary, extremely stable AveDrag drag
washer with smooth control at all conditions. |
|
|
Proudly designed, machined and assembled in USA.
**Includes a rod mount clamp.
|
LX Series
  
6/3
Two Speed Model,
Gear Ratio H6.0:1, L2.8:1
4.6:1 with clicker Single Speed Model, Gear
Ratio
4.6:1
6.0:1 with clicker
Single Speed Model, Gear Ratio
6.0:1
|
|
Lever Drag control system with pre-set drag feature.
|
|
|
New cast control system only available from Avet
Reels.
(prevention of backlash and as an line out adjustment for live bait
fishing) |
|
|
100% machined, Type 2 anodized, True-One piece
aluminum frame. |
|
|
8 stainless steel ball bearings.
|
|
|
Stainless steel fasteners, springs, clips. |
|
|
Stronger design with larger line capacity in its
class. |
|
|
All new revolutionary, extremely stable AveDrag drag
washer with smooth control at all conditions. |
|
|
Proudly designed, machined and assembled in USA.
**Includes a rod mount clamp.
|
HXJ Series
5/2
Two Speed Model, Gear Ratio 5.4:1 High,
2.4:1 Low
|
|
Lever Drag control system.
|
|
|
21 lb strike, 27 lb Max Drag on
Strike with Free Spool.
|
|
|
Dry drag for true water resistance.
|
|
|
New cast control system only
available from Avet Reels
(prevention of backlash and as an line out
adjustment for live bait fishing)
|
|
|
100% precision machined aluminum
rigid frame.
|
|
|
All stainless steel rubber sealed
ball bearings and stainless steel components.
|
|
|
Handle knob with oversized grip. |
|
|
No harness lugs. |
|
|
Proudly designed, machined and
assembled in USA.
|
Top
Shimano Reels
The
Number One choice of serious
offshore anglers and
captains.
|
|
Machined Aluminum
Frame
|
|
|
Machined Aluminum
Sideplates
|
|
|
Cold Forged Aluminum
Spool
|
|
|
Rod Clamp
|
|
|
Ergonomic Power
Handle
|
|
|
A-RB (Anti-Rust
Bearings)
|
|
|
Twin Disk Drag
System (16 only)
|
|
|
Clicker
|
|
|
Metal Series
|
|
|
Chrome Plated
Sideplate Screws
|
|
|
Ratcheting Drag
Lever
|
|
|
Twin Pawl
Anti-Reverse System
|
A mainstay for offshore spinning enthusiasts, the
Baitrunner reel provides a secondary drag system allowing your bait to swim free
for a more natural presentation - with the bail closed!
|
|
Graphite Frame
|
|
|
Graphite Sideplate
|
|
|
Graphite Rotor (3500 & 4500
only)
|
|
|
Aluminum Rotor (6500 only)
|
|
|
Diecast Aluminum Spool
|
|
|
Flat T Type Handle Grip
|
|
|
Waterproof Drag
|
|
|
A-RB (Anti-Rust Bearings)
|
|
|
Super Stopper II
|
|
|
Dyna-Balance
|
|
|
Power Roller III
|
|
|
Approved for use in
Saltwater
|
Powerful, light and durable, the leverdrag TLD IIA
reels offer 2-speed versatility, salt-resistant A-RB bearings and all the
performance you can handle.
|
|
Graphite Frame
|
|
|
Graphite Sideplate
|
|
|
Ergonomic Power Handle
(2011A & 3011A only )
|
|
|
Aluminum Spool
|
|
|
Offset Ergonomic Power Grip
(5011 & 5011LRSA only)
|
|
|
A-RB (Anti-Rust Bearings)
|
|
|
Clicker
|
The lightweight Torium is a solidly-built star-drag
saltwater reel perfect for live bait or bottom-fishing applications. Packed with
features like Super Stopper, Dartainium Drag, A-RB (Anti-Rust Bearings) and High
Efficiency Gearing (HEG), the Torium has it where it counts. Now available in
sizes from the lightweight and compact 14 to the heavy-duty 50, with its
440-yard line capacity and 30 pounds of drag.
Top
Penn Reels
Spinfisher®
SSm Spinning Reel
|
|
Full metal body and rotor |
|
|
HT-100TM
drag washer provides smooth and sure stopping power |
|
|
Sealed drag knob |
|
|
Stainless steel main shaft |
|
|
Five stainless steel ball bearings |
|
|
Infinite anti-reverse roller bearing
|
|
|
Techno-balanced
TM
rotor gives smooth retrieves, even with high cranking speeds |
|
|
Fail-free bail spring |
|
|
Penn Leveline®
wrap system |
|
|
Oversized, ergonomic power knob ob 850SSm &
950SSm models |
Slammer Spinning Reel
|
|
Sturdy full metal body and sideplate keep precise gear alignment under
heavy loads |
|
|
HT-100TM
drag washer provides smooth and sure stopping power |
|
|
Triple-supported, oversized main shaft for
uncompromising alignment |
|
|
Techno-balanced
TM
rotor gives smooth retrieves, even with high cranking speeds |
|
|
Five stainless steel ball bearings plus one
infinite anti-reverse roller bearing (760 has 6BB+1RB) |
|
|
Penn Leveline®
wrap system |
|
|
The Slammer's oversize HT-100TM
powered drag system is designed to deliver enormous power with
smooth transitions |
Sargus Spinning Reel
|
|
Sturdy aluminum body keeps precise gear alignment under
heavy loads |
|
|
Five stainless steel ball bearings
|
|
|
Infinite anti-reverse roller bearing
|
|
|
Stainless steel main shaft |
|
|
Sealed drag knob |
|
|
Techno-balanced
TM
rotor gives smooth retrieves, even with high cranking speeds
|
Level Wind
|
|
Lightweight composite side plates
|
|
|
Precision-machined stainless steel pinion
|
|
|
Brass main gear |
|
|
Counter-balanced handle with oversized paddle knob
|
|
|
209LC available with line counter
|
|
|
Stainless steel level wind |
Jigmaster
|
|
Quick take-apart frame makes it easy to change spools with
different line weights |
|
|
Black-anodized aluminum spool |
|
|
Durable and lightweight composite side plates
|
|
|
Manganese-bronze main gear |
|
|
Stainless steel pinion |
|
|
HT-100TM
powered Drag System |
|
|
Counter-balanced handle with
oversized fighting knob |
|
|
Corrosion-resistant chrome-plated
external parts |
Special
Senator™
|
|
Precision-machined, stainless
steel pinion gear |
|
|
High-strength, manganese-bronze
main gear |
|
|
Stainless steel reinforced side
plates |
|
|
Multi-disc star drag system for
smooth and consistent drag |
|
|
Anodized aluminum spool
|
|
|
Two shielded, stainless steel ball
bearings |
|
|
Convertible power handle
|
|
|
Heavy-duty clicker |
|
|
Graphite rod clamp |
Top
Fin-Nor Reels
Offshore Spinning Series
FIN-NOR OFFSHORE SPINNING REELS HAVE 4
DOUBLE-SHIELDED STAINLESS STEEL BEARINGS FOR ULTRA-SMOOTH CRANKING, AND AN
OVERSIZED MULTI-STACK OFFSHORE DRAG SYSTEM THAT MAKES EASY WORK OF THE BIGGEST
FISH.
|
|
Strong aluminum body, sideplate and rotor |
|
|
Machined stainless steel drive and pinion gear |
|
|
Stainless steel center shaft |
|
|
4 Double-shielded stainless steel bearings |
|
|
Forged aluminum spool |
|
|
Oversized multi-stack Offshore drag system |
|
|
Powerful 4.4:1 gear ratio |
Ahab Series
THIS "BIGGER IS BETTER" PHILOSOPHY TRANSLATES INTO A
SUPERIOR FISHING INSTRUMENT THAT IS CAPABLE OF HANDLING ANYTHING THE COASTAL OR
OFFSHORE ANGLER WILL EVER ENCOUNTER.
|
|
Forged aluminum spool |
|
|
Exclusive MegaDrag oversized saltwater drag system |
|
|
Machined stainless steel drive and pinion gear |
|
|
Stainless steel center shaft |
|
|
All-aluminum body and rotor |
|
|
Magnetic continuous anti-reverse |
|
|
Full main shaft support |
|
|
5-Bearing system |
|
|
Available in 4 IGFA line classes
|
Megalite Series
THESE REELS ARE STRONG ENOUGH FOR THE BIGGEST FISH.
COMBINE THIS STRENGTH WITH FIN-NOR'S SMOOTH, REPLACEABLE CORK DRAGS AND
ELECTROSTATIC MULTI-LAYER CORROSIVE COATING FOR SALTWATER PROTECTION, AND THESE
REELS ARE READY FOR ANY FLATS OR BACK-COUNTRY FISHING CHALLENGE.
|
|
Machined aluminum body and sideplate |
|
|
MegaLock magnetic continuous anti-reverse |
|
|
6-Bearing system |
|
|
Smooth, front-adjustable cork saltwater drag system |
|
|
Forged aluminum spool |
|
|
Electrostatic multi-layer corrosion protection |
|
|
Machined aluminum handle |
Top
Daiwa Reels
Sealine Series
|
|
Comes complete, no expensive add-ons needed |
|
|
Sealed stainless steel ball bearings
|
|
|
Machine-cut bronze and stainless steel gears
|
|
|
Smooth disc drag |
|
|
Spool click |
|
|
Hard anodized and paraffined finish
|
|
|
Strong aluminum spool and side plates
|
|
|
Rugged one-piece aluminum frame
|
|
|
High speed retrieve
|
Top
|
